---

index.php?page=graphweathercpp§ion=download(??? ko)Téléchargé 664 fois

Affichage de toutes les données de votre station.

---

VPLiveSetup-1.1.10.exe(??? ko)Téléchargé 1199 fois

---

DirectFromPC_vp2_wireless_1_73.zip(??? ko)Téléchargé 1521 fois

Download Support: Firmware Click on a title to see more details or to download. Our Firmware is downloadable at no charge, but requires use of our Vantage Pro Updater for Vantage Pro2 or Vantage Pro Updater for Original Vantage Pro, which are available for purchase through our secure e-commerce system. If your Vantage Pro2 Console Firmware is dated 28-Nov-05 or later, you may update your console with the Direct PC Install file. This is a stand alone application that will update your console firmware directly through the WeatherLink data logger connected to your PC. (WeatherLink for Vantage Pro2 (#6510SER, 6510USB, 6540, 6544, 6550 or 6560) is required to use the Direct PC Install file.) DO NOT USE the Direct to PC Install file if your Vantage Pro2 firmware revision is dated before November 28, 2005. WeatherLink for Mac OSX (#6520) does not support Direct PC Install files. To update your console, use a Vantage Pro2 Updater. Click here for information on updating your firmware and software if you are in a region that uses Daylight Savings Time. WeatherLink 12/11/2008: WeatherLinkIP Data Logger Firmware, 1.06 WeatherLinkIP Data Logger Firmware Download (292 KB) Version 1.0.6 1. Modified the firmware so that it can process a fragmented 200 Ok response correctly and thereby eliminate lockups that can be encountered when using slow satellite ISPs. Version 1.0.4 1. Resolved a bug that locked up the data logger if a valid DNS could not be found. If a valid DNS cannot be found, the logger will try again every 2 minutes. 2. The displayed units on WeatherLink.com will now match the individual units set on your console. Changes to the unit settings or rain collector size on the console will be immediately uploaded to WeatherLink.com. 3. If the data logger was not able to upload archived data, it will now retry in 5 minutes rather than waiting for the next one-hour upload. Version 1.0.3 1. Added the capability for updating the console or Envoy firmware through the WeatherLinkIP data logger. 2. Added support for DHCP servers that require the Broadcast flag to be sent. 3. Added a -3º F inside temperature offset to compensate for heat produced by the WeatherLinkIP data logger. 4. Fixed a bug where static IP settings were not always saved through a power cycle. 5. Improved the reliability of the WeatherLinkIP firmware. Platform: Version: 1.06 File Name: WeatherLinkIP_firmware_v106.exe File Size: 292 KB Released: 12/11/2008 5/24/2007: WeatherLink for Irrigation Data Logger Firmware, 2.01 WeatherLink for Irrigation Data Logger Firmware Download (124 KB) Firmware version 2.0.1 1. Fixed bug that caused Alarm port to not work when "Delay on Release" and "Delay on Reactivation" values were not set to zero. 2. Changed the smallest irrigation cycle from hour to day. 3. Removed "Rain-ET Threshold", added "Irrigation amount", "Maximum Effective Rain". 4. Fixed problem with resetting values whenever a serial command was received from the PC. Note: To update your data logger firmware simply connect your data logger to your PC. Run this program. Select your COM port number and press OK. Required: To use these files you MUST HAVE WeatherLink software version 5.7.1 or later, a Davis Vantage Pro or Vantage Pro2 console and a Davis WeatherLink for Irrigation data logger (#6560). Platform: Version: 2.01 File Name: IrrigationFirmwareUpdater_201.exe File Size: 124 KB Released: 5/24/2007 3/30/2007: WeatherLink for APRS Data Logger Firmware, 2.02 WeatherLink for APRS Data Logger Firmware Download (124 KB) Firmware version 2.0.2 1. Report 2-minte average wind speed and 10-minute high wind speed instead of 1-minute average wind speed and 5-minute high wind speed. 2. Modify Daylight Savings to reflect the new 2007 dates. (Requires the latest console firmware v1.60.) 3. Report altimeter instead of current barometer value. 4. Fixed issue with Daylight Savings in manual mode (this bug requires the latest console firmware version 1.60). 5. Report hourly rain and 24 hourly rain as "000" if both daily rain and storm rain are 0 initially otherwise show "….." in the APRS packet until the measuring time elapses. 6. Add minimum pressure check on the altimeter data. Note: To update your data logger firmware simply connect your data logger to your PC. Run this program. Select your COM port number. Repower your console. When you have confirmation that the updater program has detected your data logger, then press OK. Required: To use these files you will need a Davis Vantage Pro Console or Vantage Pro2 Console and a Davis WeatherLink for APRS Data logger (#6540). Platform: Version: 2.02 File Name: APRSFirmwareUpdater_202.exe File Size: 124 KB Released: 3/30/2007 Vantage Pro2 12/5/2008: Vantage Pro2 Cabled Console Firmware, 1.80 Vantage Pro2 Cabled Console Firmware Download (469 KB) NOTE: This firmware is only for Vantage Pro2 Cabled Consoles (#6312C). Firmware version 1.80 1. Improved wind speed translation algorithm for increased accuracy. 2. Improved digital barometer measurements at very high temperatures. Firmware version 1.75 1. Fixed a bug that causes the console to display incorrect yearly rain values when the unit of measure for rain is set to millimeters. 2. Supports direct updates using USB or TCP/IP connections. Firmware version 1.73 1. Fixed a bug that gave the High Rain Rate an incorrect time stamp. 2. Fixed a bug that caused an inaccurate barometric reading at high elevation. 3. Extended the amount of time the lamp stays on from 10 seconds to 15 seconds. If a key is pressed within 15 seconds, the lamp stays on for an additional 60 seconds instead of 20 seconds. Platform: Version: 1.80 File Name: vp2_cabled_firmware_1_80.zip File Size: 469 KB Released: 12/5/2008 12/5/2008: Vantage Pro2 Cabled Console Firmware, Direct PC Install, 1.80 Vantage Pro2 Cabled Console Firmware, Direct PC Install Download (557 KB) NOTE: This firmware is only for Vantage Pro2 Cabled Consoles (#6312C). Firmware version 1.80 1. Improved wind speed translation algorithm for increased accuracy. 2. Improved digital barometer measurements at very high temperatures. Firmware version 1.75a 1. Fixed a compiler bug that would not allow firmware update v1.75 to work properly. Firmware version 1.75 1. Fixed a bug that causes the console to display incorrect yearly rain values when the unit of measure for rain is set to millimeters. 2. Supports direct updates using USB or TCP/IP connections. Firmware version 1.73 1. Fixed a bug that gave the High Rain Rate an incorrect time stamp. 2. Fixed a bug that caused an inaccurate barometric reading at high elevation. 3. Extended the amount of time the lamp stays on from 10 seconds to 15 seconds. If a key is pressed within 15 seconds, the lamp stays on for an additional 60 seconds instead of 20 seconds. Platform: Version: 1.80 File Name: DirectFromPC_vp2_cabled_1_80.zip File Size: 557 KB Released: 12/5/2008 12/5/2008: Vantage Pro2 Wireless Console Firmware, 1.80 Vantage Pro2 Wireless Console Firmware Download (478 KB) NOTE: This firmware is only for Vantage Pro2 Wireless Consoles (#6312 or #6312OV) and is intended for update using a Vantage Pro2 Updater. Firmware version 1.80 1. Improved wind speed translation algorithm for increased accuracy. 2. Improved digital barometer measurements at very high temperatures. Firmware version 1.75 1. Fixed a bug that causes the console to display incorrect yearly rain values when the unit of measure for rain is set to millimeters. Firmware version 1.73 1. Fixed a bug that gave the High Rain Rate an incorrect time stamp. 2. Fixed a bug that caused an inaccurate barometric reading at high elevation. 3. Extended the amount of time the lamp stays on from 10 seconds to 15 seconds. If a key is pressed within 15 seconds, the lamp stays on for an additional 60 seconds instead of 20 seconds. Platform: Version: 1.80 File Name: vp2_wireless_firmware_1_80.zip File Size: 478 KB Released: 12/5/2008 12/5/2008: Vantage Pro2 Wireless Console Firmware, Direct PC Install, 1.80 Vantage Pro2 Wireless Console Firmware, Direct PC Install Download (566 KB) NOTE: This firmware is only for Vantage Pro2 Wireless Consoles (#6312 or #6312OV). Firmware version 1.80 1. Improved wind speed translation algorithm for increased accuracy. 2. Improved digital barometer measurements at very high temperatures.

---

DirectFromPC_vp2_wireless_1_80.zip(??? ko)Téléchargé 624 fois

Logiciel permettant de demarrer automatiquement Weatherlink avec la page bulletin ouverte.

---

WLBulletin-1.0.0.zip(??? ko)Téléchargé 811 fois

---

WeatherLink_Install_580.exe(??? ko)Téléchargé 860 fois

Note: You must unplug your WeatherLink USB data logger from the USB port on your PC before you install this upgrade. Version 5.8.2 Features 1. Fixes a critical bug that prevented proper USB driver installation. 2. Updates all USB virtual COM drivers to version 5.3.

---

WeatherLink_Install_582.exe(??? ko)Téléchargé 636 fois